Recently, I solved network connectivity problem at home by setting up a slightly complex network using an old BSNL wa3002g4 router. Earlier I wrote about how I used this BSNL wa3002g4 router as a WiFi switch and lot of people said that the post was very useful. So I decided to document this setup as well, so that it will be useful for someone who wants to do the same thing 🙂
First, let me explain the problem that I was facing. I have half a dozen devices running multiple OS (two desktops, a Mac, an iPhone, couple of Android phones, couple of Raspberry Pis.. you get the idea right 😉 ) that I wanted to be in the same network and share my single internet connection. Also, I live in two floors and my WiFi signal was too week to penetrate the concrete across the floors.
In my old setup, the cable from my broadband provider was connected to a Netgear router, that acted as a network switch as well as a WiFi router. This was in my top floor where the desktops were present. But when I am in the bottom floor, the WiFi signal was too weak to be used in my laptop or in my phones.
My first thought was to buy a WiFi expander and use it to boost the WiFi signal in the bottom floor. When I was about to buy the signal booster, I remembered that I had an old BSNL wa3002g4 router, which I was using earlier as a WiFi switch. I know that it is a multi-functional device, so I was trying to see if I can use it to expand my WiFi range.
Unfortunately, it can’t act as a WiFi expander. But then I realized, I can still use it as a switch. I started to experiment a bit with it and after some trial and errors, I made it to work in the way I wanted 🙂
My current setup
The cable from my broadband provider (currently ACT broadband, who gives me 15 Mbps 😉 ) is connected to the input of my Netgear router which is placed in the top floor. It gives out both wired and wireless connections to the devices in the top floor. One of those output port from Netgear is connected to my old BSNL wa3002g4 router which is placed in the bottom floor. This second router gives wired and wireless to the devices in the bottom floor.
After I had this setup, I realized that both the routers were creating their own sub networks and the devices are not in the same network. Also I had to use two different WiFi ssid’s which kind of defeated the whole purpose.
It was at this point, that I discovered that my BSNL router has a feature called DHCP relay, which allowed me to configure the connections so that they can be in the same network.
DHCP relay, allows you to specify a different DHCP server from where the device should get dynamic ip address instead of generating ip address on its own. I specified the ip address of my Netgear router as the DHCP server in the DHCP relay config of my BSNL router.
This allowed the BSNL router to relay all DHCP requests to the Netgear router instead of generating the ip address on its own. Now all my devices were connected in the same network.
The next problem that I had to solve was setting up the WiFi ssid’s. Again by trial and error I found that if I configured both routers with the same WiFi ssid and same authentication parameters, then the devices can connect to both the routers seamlessly. I changed the WiFi config in both the routers to be the same and then my devices started connecting to the network without any issues even when I moved across floors. The devices always pick up the router which has the best signal.
And now I am finally happy that all my devices are in the same network and that I can connect to my network from any part of my home, without worrying about the signal range 🙂
Could not able to find the DHCP relay config of my BSNL router. Could u plz assist me to configure. Exact issue i am having..
Hii guys, you have a nice blog. Now i can setup a home network between two routers.
Hi – great blog, solves a major part of the issue I have been facing. The remaining part is: given the physical configuration of the floors in my house, i need to split the wire that comes from my internet provider’s pillar into 2. One of these 2 needs to connect to a router in the basement, and the other will go up to the terrace (from where it will come down to the higher floors through the shaft). So what can i use to achieve this split? Is there some simple kind of a splitter that just breaks an input broadband wire into 2 output wires? Thanks a lot
You can use another router or switch as a splitter.
So you actually used the second one as a repeater. Is their any way to use two broadband to connect to single connection and as a result doubling your speed. Is it possible with BSNL?
This is really cool…!!!
A useful post for people who are not too much into this technology stuff and still want set up their private networking system.
Keep it up buddy..!!!
Hi, nice detailed information. saved my day and lot of hardware after i bought the router. Thanks a lot.
Hi – I have a bit of a problem in setting up my home network. My main modem+router is a Huawei one and my internet connection is VDSL (not ADSL). Internet works fine on this (>15mbps actual download speed). However, I need a strong signal on another floor, so I’ve installed a cat6 wire that runs from the Huawei modem+router to that floor. Now from my earlier internet connection, I have a Beetel 450TC3 modem+router which I want to use as an access point on the other floor and create a separate wifi ssid/password. My internet provider tells me it is absolutely possible to turn off the modem functionality of the beetel machine, but refrains from telling me how as it is not in their mandate. When I connect the beetel machine with the previously mentioned cat6 cable, I am unable to access the configuration page. Ipconfig gives me the default gateway of the huawei machine. Can you please help? I dont want to buy a new router if this issue can be solved. Thanks a lot!!
Thankyou for your advice of the above, however I still have a problem. I have as modem (1) a Edimax AR 71888 Wna connected to Modem (2) a Dlink DIR645 via cat5.
The Edimax(1) has a switch connecting printers, etc (all hard wired).
The Dlink(2) is used mainly just as a wireless access point to any thing moves! It is a powerhouse!
But I have a IP problem though as the WiFi network on the Dlink is 192.168.0.100 does not see the Edimax (1) on 192.168.2.1. Both networks connect well with the net, but if I want to print from a mobile, I have to hook it up to the wired network. Can I simply change the IP of say the Dlink to say 192.168.2.120. Laptop is /0.101.How can I setup the mobiles to see the hardwired printers?
I would greatly appreciate advice.
Nice detailed information. Thanks
Thanks for provide the information. Really it helps to me.
An informative blog post, the blog gives an idea of the routers and how they work in a link. There is now a broadband or mobile data connection available in every home, and I would like to say that Asianet Broadband is the best broadband connection in Kerala. About 20 + years of broadband experience in Kerala and an active customer service team. A market leader in south India, it is ranked among the top 20 ISP’s in India by TRAI and also as one of the fastest-growing ISPs in India. For more, please visit: https://asianetbroadband.in
Thanks for sharing the informational content. Really a nice post is sharing.
If you want to become a digital market expert, then join our course. You can simply Click Digital marketing training in Chandigarh for more information.